These non-adhesive vinyl tapes prevent accidents by increasing visibility of hazards. Safety message is continuously repeated in large black lettering. Each roll of tape measures 3" X 1,000'.

These non-adhesive vinyl tapes prevent accidents by increasing visibility of hazards. Safety message is continuously repeated in large black lettering. Each roll of tape measures 3" X 1,000'.

This Glow-in-the-Dark Anti-Slip traction tape is perfect for use in emergency exit routing areas such as stairwells, laneways, fire aisle, and exits. The high traction surface is combined with a glow-in-the-dark carrier that aids in finding important emergency routes, equipment, and exits during power outage or emergency conditions. This product has a similar surface and adhesion to similar colored and black anti-slip products, but an added safety glow feature. Tape offers a "GLOW" that is readily visible to the light adjusted eye for up to 6 hours, with the strongest results in the first 60-minutes. 2" x 60'.

Features include:

• 2" x 60'
• Has an aggressive acrylic adhesive system that bonds to most any clean dry surface

Glows in total darkness after being exposed to natural or artificial light. Indoor-use tape is a flexible vinyl film with pressure-sensitive adhesive. This non-toxic tape is washable and resists abrasion and chemicals.

Anti-slip grit tape offers extra traction to ensure a safe workplace. Tape is constructed from a thick PVC base layer which is impregnated with an aggressive 60-grit compound. The backing has an aggressive acrylic adhesive for longevity and will adhere to most clean, dry surfaces. Works well in both indoor and outdoor applications. Tape is water resistant, but is not recommended for continuous submersion.

Inexpensive 6 mil vinyl adhesive tape is the easy way to mark aisles and physical hazards. Over-laminated for long lasting wear in all weather conditions.

Conspicuity reflective tape provides the highest standard in reflectivity on the market. Exceeds the requirements of NHTSA (49 CFR 571), and every strip carries the DOT-C2 certification for compliance. This conspicuity tape meets the industry’s highest visibility guidance in wet or dry weather conditions with full reflective strength from distances of 1,000 feet or more. Easy to apply, this tape sticks to a variety of surfaces including fiberglass, aluminum, and painted steel.

Gator Grip® die cut shapes are made from the same material as other Gator Grip® products, but pre-cut to give a finished look on your floor or equipment. All cleats come with rounded corners to reduce tape lifting and flagging. The acrylic adhesive system forms a strong bond to most any clean, dry surface. Gator Grip® cleats work well in both indoor and outdoor applications. Water, chemical, and oil resistant for indoor and outdoor usage.