The Milwaukee® SDS Plus DUST TRAP™ is the industry's first OSHA® compliance solution without a vacuum. The universal fit allows this shroud to work with all Milwaukee SDS Plus rotary hammers and drill bits up to 8"long. The DUST TRAP™ is OSHA® objective data compliance solution when used without a vacuum and OSHA® Table 1 compliant when used with a dust extractor, giving users the flexibility to adjust to the daily demands of the jobsite while being compliant. Replacement sleeves are available (#25147)
Use this replacement sleeve with the Milwaukee® SDS Plus DUST TRAP™ Drilling Shroud. The Milwaukee® SDS Plus DUST TRAP™ is the industry's first OSHA® compliant solution without a vacuum. The universal fit allows this shroud to work with all Milwaukee SDS Plus rotary hammers and drill bits up to 8"long. The DUST TRAP™ is OSHA® objective data compliance solution when used without a vacuum and OSHA® Table 1 compliant when used with a dust extractor, giving users the flexibility to adjust to the daily demands of the jobsite while being compliant.
Included in this kit is the M18 FUEL™ Hammer Drill (2704-20), the most powerful 18-volt cordless drill on the market. Delivering up to 1,200 in-lbs of torque and up to 2,000 RPM, it provides faster drilling speed under heavy load to increase productivity. Also included is the M18 FUEL™ 1/4" Hex Impact Driver (2753-20). At 1800 in-lbs of fastening torque, this impact drives screws faster but also provides greater control over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™ M18 FUEL™ features the most advanced cordless technology available; a POWERSTATE™ Brushless Motor, REDLINK PLUS™ Electronic Intelligence and REDLITHIUM™ Battery Technology, resulting in longer motor life, more run time and more power
Designed to activate the blade 3X faster than a 2-handed opening knife, the Fastback Utility Knife features a one-handed blade opening for easy activation. A tool-free blade change offers less down time in the field, while a thin body design allows the user to easily store the knife in their pocket. Integrated gut hook allows you to cut without opening the knife and wire stripper feature can strip up to 10-Gauge wire. Thin body design fits easily into a pocket. Includes 5 utility blades.
This spring assisted knife combines jobsite performance with the outdoorsman lifestyle. Features a durable black oxide coated stainless steel blade and spring assisted opening for fast one-handed opening. Liner lock secures blade in open position. The handle features a Realtree Xtra. Camo finish and reversible wire form belt clip that provides quick access without fraying pockets.
This versatile organizer is designed with the needs of the professional tradesman in mind. Includes (8) small and (2) large bins that can be mounted on common jobsite materials by utilizing the integrated screw slots. The no travel seal around the perimeter of each bin prevents small items from migrating from one bin to the other. The 4" x 4" small bins can be easily swapped out with a common electrical box. Contains innovative side clips that allow the units to be attached together, and provide full access to each when they are stacked on top of one another. For added durability, features a reinforced rib for strength and an integrated weather seal gasket to prevent water intrusion.
Socket adapters are engineered for extreme durability and up to 10x life. SHOCKWAVE Impact Duty™ Socket Adapters are made from proprietary steel and heat treated to control hardness.
Milwaukee. SHOCKWAVE Impact Duty Titanium Drill Bits with RED HELIX are engineered for impacts and drills. Designed with a Variable Helix with an aggressive 350 Helix Angle which ends at 150, the Impact Duty Titanium Drill bits with RED HELIX provide Rapid Chip Removal to limit heat buildup to Stay Sharper Longer. The 1350 split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits.
Kit Includes:
(2) 1/16" Titanium SHOCKWAVE
(2) 5/64" Titanium SHOCKWAVE
(1) 3/32" Titanium SHOCKWAVE
(2) 7/64" Titanium SHOCKWAVE
(2) 1/8" Titanium SHOCKWAVE
(1) 9/64" Titanium SHOCKWAVE
(2) 5/32" Titanium SHOCKWAVE
(1) 11/64" Titanium SHOCKWAVE
(2) 3/16" Titanium SHOCKWAVE
(1) 13/64" Titanium SHOCKWAVE
(1) 7/32" Titanium SHOCKWAVE
(2) 1/4" T
These nut drivers are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness. Features a powerful magnet allowing for a secure grip and solid bit engagement. The bits feature color-coded rings for quick and easy size identification and a chamfered edge to allow for fastening in tight spaces. Ideal for heavy duty impact applications, and delivers a full system solution for all the user's drilling and fastening needs.
This hole saw kit features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. Includes Plug Jack™ all access slot design that allows for full access during plug removal. This gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes.
This Hole Saw Arbor features tool-free operation and is universal, a quick change with all brands of hole saws. No adapters required. Twist to release and with durable hardened steel construction. Fits all hole saws up to 1/4" and larger. Fits all drill chucks 3/8" and larger.
Powered by FUEL™ technology, this circular saw cuts faster and weighs up to 40% less than corded saws while delivering up to 300 cuts per charge. With the POWERSTATE™ brushless motor, the saw cuts faster than corded counterparts. REDLINK PLUS™ Intelligence provides optimized performance and overload protection by using total system communication between tool, battery and charger. REDLITHIUM™ XC5.0 Battery Technology provides up to 300 cuts per charge with superior pack construction and electronics - delivering more work per charge and over the life of the battery than any competitive lithium-ion battery on the market. Features an LED light to increase accuracy in low light situations and a rafter hook for easy storage in-between cuts. Also features a magnesium shoe and upper and lower guards to reduce tool weight without sacrificing durability.
This LED search light provides versatility, performance, and durability all in one light. It's pivoting head provides 1,250 lumens and over 700 yards of beam distance to spot objects and areas at a far distance. Features 4 output modes: spot mode, flood mode, spot/flood mode, and strobe mode, which allow the user to spot from a far or flood an area up close. Runs for up to 4 hours on flood mode and spot/flood mode with an M18 REDLITHIUM™ XC 5.0 Battery Pack, and 6 hours on spot mode and 5 hours on strobe mode. The IP54 rating provides water and dust resistance for all weather use. High-quality LEDs do not require replacement. Backed by a limited lifetime warranty.
Powered by FUEL™ technology, this reciprocating saw cuts faster than its corded counterparts and offers up to 2X more runtime and 5X longer tool life than competitive saws. The POWERSTATE™ brushless motor provides cutting power that has only been associated with corded tools. The M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack delivers up to 2.5X runtime and provides more work per charge and over the life of the pack than competitive batteries. REDLINK PLUS™ Intelligence ensures optimized performance and protection from overloading, overheating and over-discharging. The 18-volt lithium-ion SAWZALL® features an adjustable shoe, integrated LED light, and a hang hook for convenient storage on the job
These impact driver bits are engineered to be the most durable, best fitting driver bits on the market. Optimized Shockzone geometry is unique for each tip type to provide up to 30x longer life and absorbs 3x more torque vs. other impact bits. The Precise Fit Custom Machined Tip prevents stripping and reduces wobble while the Custom Alloy76 Steel and proprietary heat treat process maximizes resistance to wear and shock. Built to deliver extreme durability for the most demanding applications.
Kit Includes:
1 - ECX™ Bit 1 #1
1 - ECX™ Bit 1 #2
2 - Phillips Bit 1 P2
1 - Phillips Bit 1 P3
1 - Slotted Bit 1 SL 1/4
1 - Slotted Bit 1 SL 3/16
1 - Square Bit 1 SQ2
1 - Torx. Bit 1 T15
1 - Torx. Bit 1 T20
1 - Torx. Bit 1 T25
1 - SHOCKWAVE™ 3 Magnetic Bit Tip Holder
This driver is the quietest cordless fastening solution on the market. Milwaukee's new FLUID-DRIVE™ Hydraulic Powertrain reduces metal on metal contact within the tool, delivering quieter operation, smoother performance, and increased durability over a standard impact. The POWERSTATE™ Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ batteries (sold separately) which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Includes:
