Your North American Safety Solutions Partner
Calibration gas for use with gas detectors.
Use this demand flow regulator with a calibration check gas cylinder that has an iGas. pressure switch. It attaches to the cylinder to provide proper flow rate and indicates when it is empty.
Simplify gas detector maintenance with the Ventis® MX4 Docking Station.
MSA GALAXY® GX2 Automated Test System provides simple, intelligent testing and calibration of MSA ALTAIR® and ALTAIR PRO Single-Gas Detectors and ALTAIR 4X and ALTAIR 5X Multigas Detectors. Easy-to-use automated test stand offers high performance as either stand-alone unit or integrated portable detector management system, enabling total data access and control of the MSA ALTAIR family Gas Detector fleet. New MSA Link™ Pro Software for proactive safety management; gas exposure email alerts, direct data input, live filtering, test and exposure queries, collecting and printing reports. Color touch screen for ease of setup and viewing. Extremely simple to use; testing starts automatically without touching a single button. Simultaneous testing of up to ten instruments. Optimized for use with MSA’s XCell® Sensors; provides up to 50% cost of ownership reduction.
Cylinder holder for GALAXY® GX2 Automated Test System.
MSA Calibration Gas Cylinder calibrates all instruments. The gas mixture in calibration gas cylinders is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder. Aluminum 500 psig cylinder contains approximately 34 liters at atmospheric pressure. Measures 13-3/4 x 3-inches and weighs 1 pound, 11 ounces.
Regulators provide the proper flow rate for calibrating your gas detection instrument. For 58L & 103L Cylinders, 0.5L per Minute Flow.
Honeywell BW™ Solo is an easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly, and decisively to safety incidents.
Regulators provide the proper flow rate for calibrating your gas detection instrument. For 34L Cylinders, 0.5L per Minute Flow.
5 ppm Nitrogen Dioxide; 58L Cylinder
IntelliDoX Enabler Kit for Honeywell BW™ Ultra detector docking system. Supports up to 5 IntelliDoX modules. The Enabler Kit includes power supply with region-specific AC power cord, ethernet cable, inlet (purge) filter assembly, 3 ft. / 1 m calibration gas tubing, 3 ft. / 1 m purge gas tubing, 15 ft. / 4.5 m exhaust tubing, and quick connect fittings.
Regulators provide the proper flow rate for calibrating your gas detection instrument. For 34L Cylinders, 600 CGA.
50 ppm Carbon Monoxide; 50% LEL Methane; 10 ppm Sulfur Dioxide; 19% Oxygen; Balance Nitrogen; 58L Aluminum Cylinder
Regulators provide the proper flow rate for calibrating your gas detection instrument. For 34L (Aluminum) 58L and 103L Cylinders.
Calibrating your Multigas Monitor with the proper calibration gases is an essential step in ensuring that your monitor will respond to and detect hazardous gases.