Your Partner in Safety for Over 70 Years
Replacement chinstrap for the Nexus HeightMaster Hard Hat.
3M™ Elevated Temperature Hard Hat covers are designed to provide additional protection from heat for the wearer and the safety helmet. Wearing a front cover reduces the possibility of particulate dropping into the users face when the faceshield is lifted.
The universal faceshield frame is designed for integration of face protection with 3M™ Elevated Temperature Hard Hat H-700T Series. Made using heat resistant 15% glass nylon material. Two position system locks shield up and out of place when not in use. Features quick change system for easy window replacement. Linkage system is compatible with or without 3M earmuffs.
For use with: 3M H700T Series Elevated Temperature Hard Hats (#76405 & #76412)
The SNAP BRIM sunshade is the only one of its kind. Certain models are arc tested to ASTM F2178 Standards: At 33 cal/cm2 no ignition. The durable SNAP BRIM provides year-round protection sheltering from rain, dust and snow, and is long lasting - averaging 1-2 years with regular use. The constant shade of SNAP BRIM provides superior sun protection for outdoor workers shielding them from harmful UV rays and also helps keep workers cool, reducing the risk of sunstroke, heat fatigue and dehydration. Includes a detachable Nomex. neck shade for maximum UV protection. SNAP BRIM is light weight causing no long-term wearer fatigue and very easy to use. The durable brim can be attached and detached in seconds and stays firmly attached in windy environments and will not flap in the wind.
This machine-washable terrycloth band snaps onto the brow of any hard hat, faceshield or welding hood to absorb excess perspiration.
This sweatband's innovative design has made wearing a helmet more comfortable, no matter what time of year it is. The Sweatsopad has been field tested in a variety of industries and is proven to reduce "helmet head", improve grip, and provide maximum perspiration absorption. Made of flame-retardant cotton, this product features an air-cushioned inner layer made of thousands of small cells to hold excessive perspiration. The hook-and-loop fasteners fit all major brands hard hats and welding faceshields.
Keep hard hats in their place with these adjustable 2-point chinstraps. 3/4" polyester webbing attaches directly to your MSA V-Gard Hard Hat shell.
Chin Strap for Bullard Classic Hard Hats.
This warm and lightweight flame-resistant fleece balaclava offers a soft velour inner shell, combined with a jersey outer shell. It is constructed of a 5.8-ounce Nomex/Kevlar blend, sewn with Kevlar thread. Clothing has an arc rating of 9.7 cal/cm2. Meets NFPA 70E Hazard Risk Category 2 and ASTM F1506.
This machine-washable terrycloth band attaches with Velcro onto the brow of any hard hat, faceshield or welding hood to absorb excess perspiration.
This insert turns any baseball cap into a piece of protective headwear offering a mild form of head protection. Does not meet ANSI Z89.1 standard.
Use this two-piece stretchable fleece balaclava liner to cover your neck, head, and face; or detach for use as a separate cap or neck gaiter. Pieces are attached via hook-and loop tabs. Liner can also be attached to a hard hat using the hook-and-loop suspensions.
Keep workers cool and comfortable with reusable sweatbands. Cellulose Bands are naturally soft, and never dry or brittle.
2-Layer Winter Liners are made of a cotton twill shell and a polyester fleece lining. This liner features warming pack pockets near the ears and hard hat suspension ties. Shirred elastic at the forehead keeps warmth in and cold out.
Use this Brow Pad replacement for 3M™ H700/H800 Series Hard Hats (#43004 - 43019, 43056 - 43112, 43116 - 43159).
Keep workers cool and comfortable with reusable sweatbands. Deluxe Bands features a reinforced sponge for greater absorption.
Hat liners and sweatbands keep workers cool and comfortable û just snap or slide them into your hard hat or bump cap.