Your North American Safety Solutions Partner
Macurco 6-Series Fixed Gas Detector
Macurco 12-Series Fixed Gas Detector
Macurco Field Calibration Kit
Macurco Field Test Gas Canister
Macurco Alarm/Burglary Gas Detector
The Macurco Horn and Strobe Series is designed for spaces where distinctive visual or audible signal is required. These devices use low current to provide a high decibel output, and can be easily seen and heard from afar. The Horn and Strobe works well with Macurco products, including the DVP-120, DVP-120M control panels, and the Macurco 6 and 12 Series detectors. This notification device can be flush or surface mounted on a standard 4” x 4” electrical box.
The Macurco MRS-485 Adapter is an accessory used to convert the 4 to 20 mA analog signal from Macurco 6-Series type detectors to a digital signal for use with multipoint addressable systems. The Macurco MRS-485 simply plugs into the back of the detector and a single screw fastens it in place. The MRS-485 accepts the 4 to 20 mA output and is powered from the same connection as the detector. The MRS-485 has the ability to interface with building automation systems, control panels, or other control devices that accept Modbus communications.
Synchronization Module for use with Macurco Horn and Strobe units.
The DVP-120M is a Modbus-Enabled Detection and Ventilation Panel with up to 87 Modbus addressable sensors on three channels of 29 sensors per channel, plus the original 12 analog 4 to 20 mA sensor channels. The DVP-120M increases the capacity of the DVP-120 (#25275) from 12 detectors to 99. System wiring includes 4 to 20 mA current loop and RS-485 serial interface.
Plug in Adaptor used with Macurco 6-Series, Horn and Strobe Series, CM-E1 (#25320), and GD-2B (#25319).
The DVP-120 exhaust fan controller, in conjunction with Macurco gas transducers, provides automatic controls to help maintain an acceptable environment in parking garages or other facilities. The DVP-120 system is designed to meet specifications for safety in enclosed parking garages, including the Uniform Building Code and OSHA 50 ppm CO requirements. The DVP-120 can control up to 12 gas sensors in any combination.