Insert tube in the pump and pull out the pump handle for use.

The Draeger CMS (Chip Management System) uses a mass flow controller to take a precise air sample. Simply insert the CMS Chip and follow the instructions. TWA levels are typically analyzed in 1-2 minutes. The color change is measured with a photo-optical system, eliminating any human subjectivity. Upon completion of this process, the concentration is indicated on the LCD display. Unit is accurate within 4 -10% of measured values. This unit does not require gas calibration because all measurement and calibration information is stored on a bar code on the CMS Chip. A leak check is performed before each measurement, so you are assured of accurate indications every time. The on-board data recorder stores up to 50 measurements with the gas/concentration and date/time. Unit runs on four AA batteries and will deliver about 100 measurements per battery change.

This hand-held ergonomically-designed pump provides quick and precise sampling every time. Tube tip breaker catches the glass ends of tubes and comes standard with each kit. Insert tubes in the pump and pull out the pump handle for use. A manufacturer's lifetime warranty guarantees years of dependable service.

Features include:

• Kit includes pump, spare parts, carrying case, and instruction card
• Tubes sold separately

This Remote Sampling Pump makes the Draeger CMS (Chip Management System, #28627) an ideal choice for confined space entry applications.

The datalogger records both humidity and temperature with a date and time stamp. Using a standard USB connector, stored readings (up to 48,000) can be conveniently transferred to your PC in PDF or Excel spreadsheet format.

• Large LCD display optimizes viewing
• The smart LED provides color-coded humidity and temperature readings
• User-programmable settings include: sample rate, start delay time, alarm delay time, high/low alarm range and security feature
• You can bookmark up to eight locations in the data recording log
• Battery life is approximately three months
• Unit includes two CR2032 batteries, a USB cover (which can be used as a stand), a wall mounting screw and a built-in hanger

This field-replaceable temperature and relative humidity sensor is designed specifically for use with FLIR moisture meters MR77 (#22242), MR176 (#22261) and MR277 (#22240).

Featuring Infrared Guided Measurement (IGM) technology powered by an 80 X 60 thermal imaging sensor, this unit visually guides you to the precise spot that moisture may be hiding.

• Use the integrated laser and cross hair to locate areas of moisture
• An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements
• The field-replaceable temperature and relative humidity sensor can simply be removed and replaced
• Use the FLIR Tools® software to share images with customers and create/send reports

Quickly find moisture, air leaks, insulation voids and more. This is the first FLIR building inspection system to combine the advantages of Infrared Guided Measurement (IGM) and patented Multi-Spectral Dynamic Imaging (MSX) with advanced environmental sensors to help you quickly locate, clearly identify and easily document problems.

• IGM technology and a laser pointer allow you to pinpoint moisture issues with the integrated non-invasive sensor and then capture accurate readings across the problem area with the provided external pin probe
• The automatically calculated environmental readings and a field-replaceable humidity/temperature sensor minimize downtime
• Connect to external devices via the MeterLink&Trade; Bluetooth wireless connection and use the FLIR Tools® mobile app