Your Partner in Safety for Over 70 Years
Ridge-It Anchors are designed for new construction or as a retrofit on wood rooftops. Anchors are constructed of stainless steel with zinc-plated steel D-rings for long service life.
This anchor virtually eliminates the need for tools to remove a stuck anchor from the hole. It is 22kN rated, and an ideal connection point for a personal fall arrest system, work positioning system, personnel riding system or rescue system. Anchor is portable and reusable so it can be easily removed and re-installed. Load cable and chock release cables are shielded from damage caused by grinding against the concrete lip of the hole. Unit is constructed of stainless steel, aluminum and other non-corrosive materials.
Finally, a concrete anchor that will hold-up to its environment, for use in temporary or even permanent applications. Safe "hook-up" indicator notifies the user that the anchor has been installed properly. Anchor is an ideal connection point for shock-absorbing lanyards, self-retracting lifelines, or even horizontal lifeline systems. Unit installs into 11/16", 18 mm or 3/4" holes. Meets applicable OSHA and ANSI standards.
This high-strength aluminum anchor slides along the beam with the worker to provide increased safety, mobility and productivity. Unit connects horizontally to I and H-beam flanges and fits beam flanges from 3" - 14" wide.
3M™ Reusable Hinged Roof Anchor for flat or sloped wood roofs with D-ring and fasteners. Anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all-purpose, steel, concrete, roof, or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA's criteria of a 2-to-1 safety factor.
3M™ DBI-SALA® Steel D-Ring Anchorage Plate with zinc plated steel D-ring and 304 stainless steel plate. Bolt or weld to structure for fall arrest anchor point. Versatile and simple installation provides a safe fall arrest tie-off point almost anywhere you need one. Pre-drilled 1/2" holes.
Beamers are designed for fall arrest anchorage and also make an excellent end point for horizontal lifeline systems. Units install to a beam structure in seconds and are easily adjustable.
Work confidently with the 3M™ Protecta® Sliding Beam Anchor. This durable solution provides a high-strength anchorage point that follows you while you work. Once you secure it to the beam using the integrated adjustment buttons, simply connect your Self-Retracting Lifeline (SRL) or lanyard to the rotating D-ring and you're ready to work.
Use this trolley in combination with one of our self-retracting lifelines. It glides effortlessly along the beam and provides horizontal mobility and fall protection. Trolley guards protect the wheels from damage and keep the beam clear of debris. Dual adjustment dials are fixed to the trolley for precise alignment in 1/8" increments. Unit fits beam flanges from 3" - 8" wide and 11/16" thick.
Fixed Beam Anchor is specifically designed for fall arrest anchorage and makes an excellent end point for a horizontal lifeline system. Unit installs in seconds to the beam structure, with final tightening using a built-in adjustment handle. Attach it to the beam structure in any orientation or direction for added versatility. Unit offers 5,000 lbs. minimum strength in any direction and fits beam flanges from 2-1/2" - 12" wide and 1-1/2" thick.
This horizontal lifeline system is lightweight, easy-to-install and extremely portable. Unit will work alongside you during maintenance, bridge work, construction and manufacturing with absolute safety and reliability. The built-in shock absorber limits arresting forces during a fall and provides the user with a visual impact indicator for added safety. The complete system includes a 60' lifeline with tensioner, built-in shock absorber, two carabiner attachments, two connecting o-rings, two 6' tie-off adaptors and a storage bag. Can be used with any suitable 5,000 lb. rated anchorage point.
The anchor is a reusable, safe and secure anchorage solution used for horizontal, vertical, or overhead applications. The multipurpose design can be used in either precast concrete or steel flanges of varying thicknesses.
3M™ Protecta® PRO™ Concrete Wedge Anchor Concrete Wedge Anchor for 3/4" (19 mm) hole with swiveling D-ring. Portable and reusable. Device can be removed and simply re-installed in a new location for added jobsite flexibility and lower overall cost of ownership.
Webbing/Hook Anchor Unit is designed to assist anchoring to scaffolding, pipe or angle iron. Features a large 2-1/2" hook for easy installation and a D-ring to accommodate a connecting device. Capacity of 400 lbs.
Snappy Disposable Anchor provides a safe tie-off point for temporary work where a permanent anchorage point is not necessary. When the job is complete, anchor can be bent over and the roofing material installed directly over the destroyed anchor point.
Anchors and Beamers are a vital part of the fall arrest system. Anchors securely attach connecting devices to beams, ladders, roofs or concrete. Beamers install to a beam structure in seconds and are easily adjustable. Beamers can be used as an end point for horizontal lifeline systems as well for fall protection.