Shock absorbing tool lanyard with carabiner on one end and detachable loop on the other end. Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load, this design prevents the tool from pulling the user down with it protecting those above as well as those below.
Features include:
Lanyards feature a nylon tether that has a spring inside to absorb the shock of a dropped tool and built in drop indicator. Lanyards that have been involved in a drop should be replaced. The drop indicator identifies that for you. Carabiner is made of stainless steel or aluminum to withstand corrosive environments. Carabiners, triggers, and clips cannot be removed from the lanyard, providing an extra measure of safety. The screw gate locking mechanism provides positive retention. Carabiner is load rated for safety and durability.
Bronze hammer is ideal for applications which require non-sparking conditions. The flat surface brass head absorbs impact blows, reduces rebound and helps eliminate marred work surfaces. A non-slip cushion grip provides greater comfort and safety. The ring located in the handle provides a secure attachment point.
Coil Tether is a non-conductive vinyl coil that is engineered to withstand harsh work environments. The compact design of the tether keeps the lanyard out of the way when not in use.
This 17-piece set includes 10 punches and 7 chisels. Use for cutting, shaping and removing metal softer than the cutting edge of the chisel. Use for loosening frozen or tight pins and keys or knocking out rivets. The ring is the attachment point when used at heights.
Strip wire sizes from 10 - 20 AWG. Serrated gripping jaws in the nose allow this tool to be used as a pliers. Spring-loaded handles speed work and reduce hand effort. The double-dipped handles with air cushion pockets provide comfortable grip, reducing hand fatigue. The two-piece hardened steel pivot produces longer service life. The ring located in the handle provides a secure attachment point.
Handles are designed to cut wire with ease. Induction hardened cutting edges are extremely durable. Shallow flush cutters are used for cutting hard wire. The polished heads resist rust and corrosion, extending the tool life. The ring is the attachment point when used at heights.
The flat, wide nose provides a better grip than other shallow needle-nose models. The jaws are polished with a rust-protective coating. The ring is the attachment point when used at heights.
These sockets feature a locking hole on all four sides, not just one. Ratchets and drive tools feature a locking pin which mates with the side lock hole for positive retention. This reduces the risk of misaligning the socket.
This forged one-piece ratchet provides strength and safety for industrial applications. The enclosed head is sealed to prevent the entrance of dust, dirt and liquids, preserving internal lubrication. The 36-tooth gear with 10º of engagement allows engagement in tight working areas. The chrome plating provides increased protection from rust and corrosion. The reverse lever allows users to change working direction quickly and easily with only one hand. Square drive tools are designed and manufactured with spring-loaded lock buttons. The lock button engages with the side lock holes drilled in the sockets, extensions and adaptors to ensure positive retention.
This tool set provides a solid compliment of tools. All tools are designed to be used with the tethering and retention systems which maintain or enhance the tools' functionality when used at height or near critical assemblies.
Scaffold builders literally open the box, put on the belt, and go to work with a kit that keeps them safe and increases productivity. Each tool is independently tethered, so any tool can be used and returned to its' holster, while still maintaining three points of contact. System is completely modular and can be arranged in any order on the tool belt. Holsters are designed with built-in attachment points or retractors. Tools are tethered to the holster at all times, so the risk of dropping a tool while transferring from bag to lanyard is eliminated. Several holsters also feature hook-and-loop flaps that secure the tool while being transported.
Lanyards are an economical tethering solutions for most hand tools.
This is a self-flushing retractable tether with a disconnectable loop.
This drop-prevention tool belt system is both durable and comfortable. The modular design allowa the user to customize their own personal holster and pouch set up.
Extra Deep Safe Buckets feature a hook-and-loop closure system, allowing for the safe transport of scaffold poles and large tools. A heavy-duty webbing hoisting strap comes with a built-in twist-lock aluminum carabiner for lifting.
Tethered tool systems increase jobsite efficiency by preventing tools from being dropped. Tethering prevents injuries, damage to machinery and equipment, and lost production time. Tethering also preserves the tool's original functionality and quality.
