Direct Safety® Mechanics XERO Impact Cut Resistant Gloves feature synthetic leather palms that offer superior abrasion resistance, as well as ergonomically placed anti-slip protection. The pre-curved design follows the natural curve of the hand. To relieve impacts to the palm, the gloves feature XERO foam, which absorbs impacts better than EVA or latex foam, while remaining pliable. Gloves feature Hi-Vis spandex back with thermoplastic rubber (TPR) for excellent impact resistance, a breathable knit back, and a comfortable elastic wrist band with adjustable hook-and-loop closure, which keeps debris out. The full Volkanix A4 cut-resistant liner offers 360-degree protection, not only on the palm of hand, but the back of hand as well.

Features include:

• Micro-fiber palm
• Anti-slip fingertips
• Hi-Vis Yellow spandex back with Black neoprene knuckle zone and reflective piping borders
• Color: Black/Yellow
• I.D. spot for name located on cuff
• Construction materials include nylon, spandex, polyester, polyurethane, PVC, latex, and resin
• ANSI/ISEA 138 - 2019: Level 1 Impact

When it comes to impact resistance, cut resistance, and dexterity, the Dagger® X5 TPR Impact has it all. The MultiFlex thermoplastic rubber (TPR) is strategically placed on the back of hand to provide excellent protection to the knuckles and fingers, while providing multiple flex points for comfort and reduced hand fatigue. The thermoplastic rubber is tapered in the fingertips to provide high dexterity and tactile sensitivity, while reducing hand fatigue. Double coated in the palm, with the first coat being a flat nitrile, mitigating oil and water penetration, and the second coat being a sandy nitrile, which provides an excellent grip. Constructed with tough 13-gauge seamless high-performance polyethylene (HPPE). ANSI A5 cut resistance.

Features include:

• Elongated cuffs give more protection in wrist area
• MultiFlex TPR is Blue and Hi-Vis Orange
• Construction materials include nitrile, HPPE, glass fiber, steel, spandex, nylon, and high strength nylon
• ANSI/ISEA 138 - 2019: Level 2 Impact

The Dagger® X6 is an ANSI A6 cut resistant glove designed for comfort, performance, and the ultimate back-of-hand protection. The MultiFlex thermoplastic rubber (TPR) is strategically placed on the back of hand to provide excellent protection to the knuckles and fingers, while offering multiple flex points for comfort. The thermoplastic rubber is tapered in the fingertips to provide high dexterity and tactile sensitivity, while reducing hand fatigue. Glove is constructed with tough 13-gauge seamless high-performance polyethylene (HPPE). ANSI A6 cut resistance.

Features include:

• Flat nitrile 3/4 base coating, which reduces water and oil penetration, with sandy finish nitrile palm coating, which provides an excellent grip
• MultiFlex TPR is Blue and Hi-Vis Orange
• Construction materials include HPPE, steel, glass fiber, nylon, spandex, nitrile, and thermoplastic rubber
• ANSI/ISEA 138 - 2019: Level 2 Impact

Use these gloves when facing jobs that include both potential impact and cut hazards. Thermo Plastic Rubber (TPR) on the back of the hand dampens impact to the knuckles and fingers. Gloves are further strengthened by the cut-resistant lining.

• 18-gauge continuous knit design conforms to the hand for improved dexterity and comfort
• Double-dipped nitrile coating on the palm and fingers provides superior grip and high visibility
• Gloves are touchscreen compatible for easy access to your phone or device
• Knit wrist helps prevent dirt and debris from entering the glove
• ANSI level A5 cut resistance
• ANSI level 4 abrasion resistance

These cut-resistant gloves are protected by D30 Impact Print technology to produce ANSI Level 3 impact resistance with unrivaled dexterity.

• The 18-gauge high-performance polyethylene (HPPE) tungsten knit shell offers protection against both lacerations and abrasions, while remaining lightweight
• The sandy grip on the nitrile palm improves both abrasion resistance and dry gripping power
• Palm and fingers are touchscreen capable
• Compression cuff provides a secure fit
• ANSI level A5 cut resistance
• ANSI level 4 abrasion resistance
• ANSI level 3 impact resistance
• Tested to EN 388 standards

These cut-resistant gloves are protected by D30 Impact Print technology to produce ANSI Level 3 impact resistance with unrivaled dexterity.

• The 18-gauge high-performance polyethylene (HPPE) tungsten knit shell offers protection against both lacerations and abrasions, while remaining lightweight
• The sandy grip on the nitrile palm improves both abrasion resistance and dry gripping power
• Palm and fingers are touchscreen capable
• Compression cuff provides a secure fit
• ANSI level A7 cut resistance
• ANSI level 4 abrasion resistance
• ANSI level 3 impact resistance
• Tested to EN 388 standards

These cut-resistant gloves are protected by D30 Impact Print technology to produce ANSI Level 3 impact resistance with unrivaled dexterity.

• The 13-gauge high-performance polyethylene (HPPE) steel knit shell offers protection against both lacerations and abrasions, while remaining lightweight
• The sandy grip on the nitrile palm improves both abrasion resistance and dry gripping power
• Palm and fingers are touchscreen capable
• Compression cuff provides a secure fit
• ANSI level A4 cut resistance
• ANSI level 4 abrasion resistance
• ANSI level 3 impact resistance
• Tested to EN 388 standards

Gloves are constructed of a 15-gauge knit nylon outer and 10-gauge brushed acrylic liner provide insulation during outdoor jobs on cold, wet days. Thermo Plastic Rubber (TPR) on the back of the hand dampens impact to the knuckles and fingers.

• A full nitrile coating on both the palm and the back of the hand helps prevent ice, water and snow from penetrating the glove
• The sandy grip on the nitrile improves both abrasion resistance and dry gripping power
• Palm and fingers are touchscreen capable
• Compression cuff provides a secure fit
• ANSI level 3 abrasion resistance
• ANSI level 1 impact resistance