The KleenGuard™ A45 Liquid and Particle Protection Coveralls for surface prep and paint are designed to move with workers where hazardous or non-hazardous contaminants may be present. Each protective suit is made with lighter weight fabric, allowing for improved comfort, without sacrificing protection. They are not made with natural rubber latex and are silicone free, pass NFPA 99 for antistatic materials, and feature serged seams and a water resistant zipper. These garments have a hood, skid-resistant boots, front zipper, and elastic wrists and ankles (EWA). Ideal for use in application areas where isocyanate (40%) and chromate (10%) dust protection is mandated. The reflex coverall design offers excellent fit and freedom of movement, and the hood is designed to fit with a respirator. Making the right personal protection choice is difficult. Perform with distinction with KleenGuard™ personal protective equipment (PPE).
Features include:
KleenGuard™ A30 Breathable Splash and Particle Protection Coveralls feature breathable fabric and reflex design, offering excellent fit (with elastic back) and freedom of movement. The material is strong and abrasion-resistant, and filters out many water-based liquids and dry particles. Other A30 features include the seamless front (for primary exposure area), a 1 inch zipper flap, hood, elastic wrists, and skid-resistant boots that provide excellent traction on wet and dry surfaces. They protect against hazardous dry particles, aerosols, and non-hazardous light liquid splashes, and they're perfect for environments such as pharmaceutical research, aerospace, maintenance, and general manufacturing. Making the right personal protection choice is difficult. Perform with distinction with KleenGuard™ personal protective equipment (PPE).
Features include:
Tyvek® is a strong and durable non-woven material. It is resistant to penetration and is static free until laundered. It provides protection from hazardous liquids, aerosols and dry particles. Use this clothing for food processing, spray painting/finishing operations, lead and asbestos abatement, mold remediation and other applications involving dry chemicals, dirt or radioactive dust. Coveralls are made of 1000% polyethylene, so they're, lightweight, low-linting and anti-static. Clothing meets the latest ANSI sizing standards.
Coverall provides 12% more leg room and 6% more body length than competing brands. Other features include a respirator-fit hood, a seamless chest area, a zipper front, an elastic waist and bound seams and storm flap. NFPA 99-compliant polyethylene-coated polypropylene fabric is softer and quieter and features a wick-away lining for enhanced comfort.
The Kleenguard™'s three-layer fabric construction features a middle layer of porous film that allows heat and sweat vapor escape, yet protects against many dry particulates and liquids. Use during wet jobs in manufacturing plants, tank cleaning, liquid handling, rubber manufacturing and pressure washing. Garments have more fabric in key stress areas for a great range of motion. Coveralls passed ASTM F1670/1671 testing for penetration of blood, body fluids and blood-borne pathogens.
KleenGuard™ A40 Coveralls are constructed with a breathable, microporous film laminate which provides a better liquid and particulate barrier than Tyvek®. The fabric is low in lint and meets NFPA 99 criteria for antistatic materials. Coveralls are ideal for utilities, liquid handling, pressure washing, maintenance and general manufacturing.
Made from a lightweight, microporous film laminate protected by an outer fabric layer; coveralls provide a comfortable fit, while providing the liquid and particulate protection you need. The outside fabric layer protects the middle layer for added durability and comfort. The middle is a microporous film laminate that produces a particle and liquid barrier, while allowing sweat vapor to escape. The soft fabric inner layer provides comfort against the skin.
These coveralls offer a three layer SMS construction to protect against many fine dusts, fibers, liquid splashes and sprays. Coveralls are ideal for maintenance, manufacturing, food processing, agricultural jobs and more. Reflex® design is extremely comfortable with fuller cut in the shoulders and body, plus more fabric in key stress areas provides a greater range-of-motion. MicroForce™ barrier fabric provides superior particle holdout and excellent breathability. The heavier fabric is 7-1/2-times less likely to rip out than the typical ANSI standard design.
Tyvek Dual Coveralls have been designed for specific applications where demanding comfort requirements are combined with limited protective requirements for frontal exposures. They are well suited for workers who are involved in strenuous activities that can lead to heat stress in applications that include: manufacturing, utilities, remediation and maintenance. These garments offer the protection, durability and comfort of Tyvek® fabric on the front with the increased breathability of ProShield® fabric on the back. The result is a garment that provides excellent durability, an inherent barrier to fine particles on the front, and increased breathability for reduced heat stress and enhanced comfort on the back. Tyvek fabric on the front is composed of flashspun high-density polyethylene. ProShield fabric on the back is made from a polypropylene SMS (spunbond meltblown spunbond) and is optimized for comfort, softness and breathability.
Tyvek® is a strong and durable non-woven material. It is resistant to penetration and is static free until laundered. It provides protection from hazardous liquids, aerosols and dry particles. Use this clothing for food processing, spray painting/finishing operations, lead and asbestos abatement, mold remediation and other applications involving dry chemicals, dirt or radioactive dust. Coveralls are made of 100% polyethylene, so they're, lightweight, low-linting and anti-static. Clothing meets the latest ANSI sizing standards.
These coveralls provides triple hazard protection from liquid-chemical splash, flash fire and electric arc. Garments are designed to combine the trusted chemical protection of Tychem and thermal/arc protection of Nomex® into a single garment. Clothing is designed to help provide industrial workers and hazmat responders with permeation protection against a broad range of toxic industrial chemicals and chemical warfare agents and to provide escape time from flash fires and protection from electric arc. Tychem ThermoPro fabric provides at least eight hours breakthrough protection against 20 of the 21 standard ASTM F1001 chemicals and at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents. The sewn seams are covered with a strip of compatible chemical-resistant material to provide resistance against heavy liquid splashes. The attached hood with drawstring can be pulled tightly around a respirator. The longer zipper extends to the chin
These Tychem® SL coveralls protect you from a wider range of chemicals than Tychem® QC. Ideal for chemical mixing, cleanup and general industrial uses. Dow Chemical's Saranex® 23-P lamination is strong and durable. Storm flap over zippers for additional liquid holdout. Bound seams.
Polyethylene-coated Tyvek® garments provide excellent lightweight splash protection from many acids and other liquid chemicals. Clothing is used in many industrial plants and chemical cleanup operations. Coveralls feature serged seams and are generously cut to allow free movement during vigorous activity.
ProShield® NexGen® is a lighter weight composite of breathable film and non-woven fabric. It provides protection against non-hazardous dry particles and some hazardous liquids and aerosols. Coveralls come with a storm flap over the zipper and respiratory fit hood design.
ProShield® is a proprietary SMS (spunbond meltblown spunbond) polypropylene composite with excellent strength and repellency. This SMS fabric provides a barrier against non-hazardous dry particles and limited light liquid splash protection.These coveralls are blue in color.
ProShield Basic Coveralls are the affordable way to provide your workers with comfortable, quality clothing for those dirty work assignments. These spunbond meltblown spunbond (SMS) garments feature a proprietary DuPont comfort fit design that is specially engineered for enhanced worker range of motion and durability in use. Coveralls provide soft, breathable and lightweight protection from dirt, grime and non-hazardous dry particles.
Disposable coveralls come in a variety of different fabrics, each with materials perfect for any application you need. Many coveralls come with attached hood.
