Creating Safer Work Environments
Replacement cloth strap for the 3M™ Goggle Gear 500 Series Safety Goggle. Adjustable for optimal fit.
Replacement neoprene strap for the 3M™ Goggle Gear 500 Series Safety Goggle. Adjustable for optimal fit.
Use this foam gasket in conjunction with 3M™ Solus™ 1000 Series Safety Glasses? to help reduce eye exposure.
This rigid thermoformed case provides solid cover and protection for your safety glasses. The inner liner prevents lens scratching.
Slip onto the ends of temples to keep safety glasses handy throughout the day and to prevent loss. Strap provides a snug, form fit of eyewear to the face and head. It is made of nylon elastic.
Foam kit with adjustable foam seal to be used with Bolle® Rush safety glasses. WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
These molded sideshields are soft and bendable, but they also absorb the energy of an impact. Sideshields weave through the temple, so no parts or tools are required. Meets ANSI Z87.1-2003 high-impact standard and should be used only with glasses that meet ANSI standards. Using these sideshields does not make your prescription eyewear ANSI compliant safety eyewear.
Lenses feature the Ultradura® hardcoat. Lenses can be adjusted on frames for a custom fit.
Clear lenses are perfect for indoor applications.
Clear Replacement Lenses for Flex Seal Goggle.
Uvex Astrospec 3000 Replacement Lenses. Clear lenses are perfect for indoor applications.
Slip onto the ends of temples to keep safety glasses handy throughout the day and to prevent loss. Cords feature surgical grade temple attachments and an adjustable non-conductive PVC slider bead. Large end cords accommodate wide temple tips and stem safety glasses.
These cords weigh less than 4 grams. Your safety eyewear will stay in place and this lightweight retainer will stay out of your way while you perform work. The flat, low-profile rubber temple tip attachments eliminate pressure points, will not stick to hair, and maintain eyewear attachment with up to 3 pounds of pull-apart pressure.
Nylon Cords measure only 2MM thick and are ideal for thinner frames. Closed loop attachment points allow for stem adjustability and versatility.
Neoprene Cords are water-resistant and quick-drying, making them the perfect choice to secure and protect eyewear in wet conditions.
This cord is the perfect safety accessory for all electrical, fire and rescue, utility, welding, and arc flash exposed work environments. This PBI/Kevlar cord will not ignite, smolder, melt, or drip when exposed to arc flash, direct flame, sparks, or welding spatter. Adjustable non-conductive PVC slider beads allow for a custom fit. Cord is heat-resistant to 540ºF and has an arc rating of 15 cal/cm2, which meets NFPA 70E Hazard Risk Category 2.
Enhance your eye protection with these safety eyewear accessories. Our eyewear accessories include sideshields, cords and straps for safety glasses and safety goggles.