Protect against sharp edges and other lacerations with double layer of 1,000 denier nylon in a cane mesh construction. Outside edges are bound with cotton bias binding. Apron measures 24" X 36".

Carbon/Kevlar™ Balaclava Hood is double-layered and designed with a slightly longer bib, for additional arc protection. The contoured eyehole can be worn over or under the nose for maximum comfort, without compromising safety. Hood has an arc rating of 27 cal/cm2. Use in combination with the Arc Goggle (#27182) for a lightweight, cost-effective alternative to faceshields.

Buckskin leather gloves are durable and flexible, allowing wearers to maintain a good grip while handling tools or equipment.

• Shirred elastic back allows for a secure fit
• Gunn cut pattern keeps the palms free of stitching
• ANSI level A1 cut resistance
• ANSI level 4 puncture resistance

These cowhide work gloves are soft, yet durable, for dexterity plus protection during construction, industrial, agricultural or utility work.

• Shirred elastic back with 2"" slip-on cuff allows for quick donning and doffing
• Gunn cut pattern keeps the palms free of stitching
• ANSI level 3 puncture resistance

Comfort and freedom of movement are optimized with these lightweight garments. By using just a single layer of 9.5 oz. Gore® Pyrad® fabric, this clothing is up to 20% lighter, 48% thinner and 56% more flexible than other category 4 arc flash clothing.

• Kit contains a bib overall, jacket, hood and backpack
• 3M™ Scotchlite™ silver reflective trim on the bib overall and jacket enhances visibility
• Jacket features a covered zip front closure
• Faceshield offers a wide range of visibility
• Lift-front design of the hood’s faceshield makes it easy to grab a breath of fresh air
• Ergonomic design produces ease-of-movement and flexibility
• Clothing has an arc rating of 41 cal/cm2
• Meets NFPA 70E Hazard Risk Category 4

Bulky PPE can detract from wearer comfort and mobility. By using just a single layer of 9.5 oz. Gore® Pyrad® fabric, this bib overall is up to 20% lighter, 48% thinner and 56% more flexible than other category 4 arc flash clothing.

• 26"" leg zippers allow for easy donning and doffing
• 3M™ Scotchlite™ silver reflective trim enhances visibility
• Ergonomic design produces ease-of-movement and flexibility
• Overall has an arc rating of 41 cal/cm2
• Meets NFPA 70E Hazard Risk Category 4

Flame-resistant sweatshirts provide quality comfort, along with excellent protection when working in cooler conditions. These sweatshirts are designed to protect against possible intermittent flame and thermal exposures. NSA 11 Oz. UltraSoft Pullover Sweatshirts are designed to provide a generous fit in in the hood, shoulders, chest and sleeves. The drawstring hood will fit over a standard hard hat. Hooded Sweatshirt has one front pocket and can be worn as a stand alone garment, or as a layer piece for added protection. Clothing has an arc rating of 21 cal/cm2. Meets NFPA 70E Hazard Risk Category 2 and is UL Classified to NFPA 2112.

Lightweight Protera is less prickly, heavy, stiff, clingy and scratchy than other flame-retardant fabrics. Protera is inherently flame resistant, so protection won't wash or wear away. Coat features Nomex® knit wrists and Velcro front pocket closures. 32" inseam Bib Overall features quick-disconnect adjustable shoulder straps, Velcro calf closures and two front pockets with pass-through slashes for access to pants pockets. Short Coat and Bib Overall have an arc rating of 40 cal/cm2. Kit meets NFPA 70E Hazard Risk Category 4.