Your Guide to Key Glove Categories

Disposable, chemical-resistant, cut-resistant, and impact-resistant gloves are commonly used in a variety of work settings. Learn more about some of the basics of these gloves and things you should take into consideration before purchasing a certain type of glove within each respective category.

Disposable Gloves

Disposable gloves offer limited chemical protection and are intended to be used as a simple barrier between the skin and the product, while allowing greater dexterity and sensitivity with the fingers. Disposable gloves are normally intended as a single-use glove.

Disposable Glove Options
Latex rubber, nitrile, vinyl, synthetic, and polyethylene


Disposable Glove Selection Considerations
  • Exam gloves are approved for blood (must state it meets FDA standards as an exam glove).
  • Powdered gloves aid in donning and doffing.
  • Some latex gloves are listed as low protein and offer less chance of promoting an allergy (nitrile gloves are a particularly good solution to allergies).
  • Varying thickness of 1 to 9 mil (1 mil = 1/1,000”).
  • Disposable gloves are now being tested to determine how they react to Fentanyl handling.

Shop Disposable Gloves


Chemical-Resistant Gloves

Chemical-resistant gloves help provide protection from a wide range of chemicals as well as from nuisance hand injuries (when supported gloves are used). Keep in mind that there is not one single glove that will provide maximum protection against all chemicals.

Chemical-Resistant Glove Options
Latex rubber, nitrile, PVC (vinyl), neoprene, butyl, PVA, Viton, and Silvershield


Chemical-Resistant Glove Selection Considerations
  • Supported gloves have a liner that provides additional cut/puncture protection, helps with temperature extremes, and absorbs sweat.
  • Unsupported gloves are less expensive, have a true thickness listed, and generally have better dexterity.
  • Some chemical gloves are cotton flock lined to make the glove easier to slide glove on/off and provide more comfort while wearing (additionally, separate liners can be added to unsupported gloves to achieve similar benefits of a built-in liner (from a supported glove).
  • Conney’s Safety Support Team can help identify which glove provides the best chemical resistance for every situation; we review both permeation and degradation data to help give you the best options to choose from.


Chemical-Resistant Glove Selection Process
 1.  Determine the work application
 2.  Determine the exact chemicals involved (Ansell’s GUARDIAN® program is a proprietary service that can help you select the right PPE with regard to the type of chemical being handled; learn more about this program today)
 3.  If applicable, determine what kind of glove had previously been used
 4.  Choose supported or unsupported gloves
 5.  Determine the length of glove needed
 6.  Review the chemical guidelines for using/maintaining the glove

Shop Chemical Gloves


Cut-Resistant Gloves

Cut-resistant gloves provide varying degrees of cut and laceration protection to the wearer, primarily dependent on the type of material used and the thickness. Thinner style gloves can be used as a liner. The ANSI standard classifies glove cut resistance, ranking A1 through A9—A1 being the lowest indicator of cut resistance and A9 being the highest indicator. There also is an EN388 or European standard of cut resistance, ranking A through F, where A is the lowest indicator of cut resistance and F is the highest indicator.

Cut-Resistant Glove Options
Kevlar®, Spectra/Dyneema, stainless steel strands, synthetic/composite fiber yarn (like UHMWPE or HPPE), fiberglass, metal mesh, and basalt (mineral-based fiber)


Cut-Resistant Glove Selection Considerations
  • Coated vs. Uncoated – Coated gloves may have PVC dots or other material to give a better grip to the slippery surface of this category of glove; FDA accepted food gloves can have no dots; coatings on dipped gloves may be polyurethane, nitrile, foam nitrile, latex, PVC, or blends of different coatings
  • Metal mesh has the highest level of cut protection and is a repairable product
  • Kevlar® is pound-for-pound stronger than steel and is available in various thicknesses

Shop Cut-Resistant Gloves


New Back-of-Hand Impact Standard

The International Safety Equipment Association (ISEA) recently established testing, classification, and labeling requirements for products that offer dorsal impact protection.

Learn more about what you need to know about the new glove safety standard by visiting our informational webpage . While you’re there, be sure to download our FREE whitepaper about the standard.

Visit Back-of-Hand Standard Page

Related Services

Conney provides a variety of PPE audit and repair services. Visit our Repair & Warranty Center page to learn more about how we can assist you with your glove and PPE needs.

If you have any questions or concerns about gloves or any other safety-related topic, our Safety Services Team is here to help. You can always reach them at 800-462-1947 or safetysupport@conney.com.


Disclaimers:
* This offer cannot be combined with other discount offers or contract pricing. Promotion does not apply to clearance/overstock items, previous purchases, non-catalog/custom orders, orders in progress, online training or compliance services. Conney Safety Products has the right to end or modify any promotion at any time. Other restrictions may apply. Offer valid while supplies last. Products can be excluded due to manufacturer restrictions/availability. Tax and freight charges are not included in calculating orders that require a minimum purchase.