Creating Safer Work Environments
CHIL-LOCK CP-240 is an economic, fire retardant, polymeric water-based asbestos removal agent and post removal sealer. As a post removal sealer, it is designed to mist, lock down, and seal free asbestos fibers and residual asbestos containing material (ACM) after removal. It effectively locks the ACM onto cleaned, exposed substrates and polyethylene sheeting within the containment area to prevent any loose fibers from becoming airborne. It adheres to structural steel and surfaces to be reinsulated for service temperature applications up to 250:F (121:C). It is also used as a primer on structural surfaces to be fireproofed in respray applications. CP-240 may also be used in a diluted form as an asbestos removal agent to mist and wet ACM for removal purposes in the containment area.
Foster 40-51 Mold Resistant Clear Coat has a low viscosity, which allows it to be easily applied by hand or with virtually any type of airless spray system. It works well on a wide variety of surfaces: wood, painted surfaces, wall board, masonry surfaces, metal. Foster 40-51 appears white when wet, but dries to a clear finish, allowing the original surface to be visible beneath the coating.
FOSTER® ELASTOLAR® Sealant is a fire-resistive, flexible, butyl elastomer-based, vapor barrier sealant. It is designed for sealing joints in insulation (except polystyrene foam), metal and masonry wherever maintenance of a water-tight and air-tight seal is required. It can be used as a joint sealant in low velocity duct air-conditioning systems. It is ideal for sealing the laps of metal jacketing to prevent the entrance of moisture.
FOSTER® FOAMSEAL™ 30-45N Sealant is a gray, vapor barrier sealant designed for use with rigid thermal insulation including polystyrene foam. It remains malleable in joints and will not shrink or crack during repeated cycles of high and low temperatures.
CHIL-BYL® CP-76 sealant is a balanced blend of butyl polymers specifically designed for permanent flexibility in low temperature, dual temperature and high temperature insulation applications.
CHIL-JOINT® CP-70 is a non-shrinking, non-drying, economical joint sealant for applications with all types of low temperature, dual temperature and some high temperature insulation systems.
AIR-TIGHT™ FDS-181 DUCT SEALANT is a fire-resistive, fibrated, water-based sealant for indoor or outdoor low, medium and high velocity heating and air conditioning ducts. It performs as a tough and flexible adhesive and sealant, forming a durable seal against air leakage on faced duct board, flex duct and galvanized, aluminum and stainless steel metal ducts. Mechanical fasteners of the type and number normally used for duct assemblies are required to provide rigidity to the duct system.
CP-146 is a water-based duct sealant developed for use in all heating, ventilating and air-conditioning metal ductwork systems. It is easily applied, and its metallic gray color blends well with ductwork.
FOSTER Cryogenic Sealer is a two part black elastomeric sealant designed for use in cryogenic and specific chemical resistance applications. It is suitable for application to PIR and polyurethane foam, cellular glass, aerogel and fibrous glass insulations in conjunction with aluminum, steel and masonry construction materials.
FOSTER® PROTEKTOR® SEALANT is a single-component, penetrating encapsulation coating for abating asbestos fiber fallout (retention method).
FOSTER® HIGH VELOCITY DUCT SEALANT is a fast setting, elastomeric compound designed as a joint sealant for high velocity air conditioning ducts installed indoors. It may be used with or without reinforcing tapes. It has a mild ?paint type? odor and applies cleanly without stringing. Mechanical fasteners of the type and number normally used for duct assemblies are required to provide rigidity to the duct system.
FOSTER® Cryogenic Coating is a two-part, black, elastomeric coating designed for use in cryogenic applications as a vapor stop sealant. It is suitable for application to polyurethane foam, polyisocyanurate (PIR) foam, cellular glass, fibrous glass and aerogel insulations in conjunction with aluminum, steel, wood and masonry construction materials.
Foster® 81-84™ Cellular Glass and Urethane Adhesive/Sealant is a two-component, high strength thermosetting urethane adhesive containing non-flammable solvents. It is designed to bond various types of low temperature insulation to themselves and to metal and masonry substrates. After curing, it forms a strong, yet flexible bond capable of withstanding thermal shock and mechanical impact.
FOSTER 81-84NH Adhesive/Sealant is a two-component, high strength thermosetting urethane adhesive containing no flammable solvents or halide-containing materials. It is designed to bond various types of low-temperature insulation to themselves, as well as to metal and masonry substrates including stainless steel. After curing, it forms a strong, yet flexible bond capable of withstanding thermal shock and mechanical impact.