The MCR ForceFlex® Multi-Task Glove is the first of its kind to offer D30® technology protection both in the palm and back of hand. The D30® hi-shock absorbing properties out-perform similar materials. The glove is thinner allowing full flexibility and range of motion. The ForceFlex® was created in the oil and gas fields specifically to provide greater grip in dry, wet, and oily conditions. Distinguishing characteristics include two-way spandex back, hybrid fourchettes and reinforced thumb crotch for greater durability, and expansion gussets for ease of donning. Additional features are the slip-on cuff with gusset, pull tab, and ID panel for personalization.
Patented D3O® TPR back of hand protection
Patented D3O® palm padding to help dissipate impact and vibration
Aqua blue two-way spandex back
Tan suede synthetic leather palm and fourchettes for greater durability
Expansion gusset cuff for ease of donning
Orange grid pattern reinforced palm has been tailored to provide grip in dry, wet, or oily conditions
Reinforced thumb crotch for strength in a high stress area
Slip on cuff with pull tab and ID panel for personalization
Impact dissipation on knuckle up to 54% better than competitors while being up to 57% thinner
Impact dissipation on fingers up to 46% better than competitors while being up to 38% thinner
This glove is your first line of defense against cut hazards in the workplace. The glove features a synthetic palm with an internal layer of Armortex(R) Cut, delivering CE level 5 cut resistance to the palm and fingers. Fluorescent, ANSI-107 compliant TrekDry(R) form-fits the hand and provides a cool, comfortable fit in warm environments. Top it off with a secure Thermal Plastic Rubber (TPR) wrist closure and you have a critical cut-resistant tool. Sizes S-2X.
Fluorescent, ANSI-107 compliant TrekDry(R) material helps keep hands cool and comfortable
Synthetic palm with an internal layer of Armortex(R) Cut delivers CE level 5 cut resistance
Thermal Plastic Rubber (TPR) closure with hook and loop provides a secure fit
Reinforcement panels in high wear areas improve durability
When the wind picks up and the temperature drops, reach for a pair of these Wind Resistant gloves to ward off the elements. Comfortable micro-fleece lines the entire glove and C40 3M™ Thinsulate™ traps warm air to help regulate your body temperature in the bitter cold. The Wind Resistant features an internally bonded wind barrier that prevents cold air from pushing through when the gusts are strong. Stay connected to your touchscreen devices, without removing your gloves, with AX™ Double Connect on your index finger and thumb. The palm features a durable layered construction with rugged Armortex® reinforcement so you can conquer the work that lies ahead. Sizes S-2X.
When the cold front moves in, reach for a pair of Winter Impact gloves to beat the elements. Comfortable micro-fleece lines the entire glove and C40 3M™ Thinsulate™ traps warm air to help regulate your body temperature in the bitter cold. The Winter Impact’s rugged nylon outer features EVA foam knuckle padding to protect the back of your hand from unexpected impact and abrasions during cold weather work. Stay connected to your touchscreen devices, without removing your gloves, with AX™ Double Connect on your index finger and thumb. The palm features rugged Armortex® reinforcement, making the Winter Impact an essential cold weather tool. Sizes S-2X.
Hook and loop top closure provides a secure fit with outerwear
Accordion knuckle guard with EVA foam padding extends to the index and middle finger
C40 3M™ Thinsulate™ traps warm air to help regulate your body temperature
Water-resistant nylon back-of-hand protects against the elements
AX™ Double Connect touchscreen compatible index finger and thumb
Rugged Armortex® palm and thumb reinforcement provide abrasion resistance
Overlapping palm construction reduces material bunching when operating hand tools
Embossed fingertip pattern improves gripping power
Removable spring clip keeps your gloves organized for easy storage
Use the Deep Grip® glove in hazardous work environments where added protection and grip control are needed. The Skid-X™ Grip palm is double stitched with Kevlar® thread for durability and is oil resistant. Flexible TPR the back of the glove adds impact protection that bends with the fingers, and offers protection from finger tips to wrist. Features neoprene long cuff to cover the wrist.
Working with oil, drilling mud and water in oil and gas production demands high dexterity gripping power, like the grip Deep II Grip® provides. The Skid-X™ Grip palm is double stitched with Kevlar® thread for durability and is oil resistant. Flexible TPR with elevated knuckles on the back of the glove adds impact protection that bends with the fingers, and offers protection from finger tips to wrist. Features neoprene long cuff to cover the wrist.
Tow Grip SC® is a great option when working with wire rope, cables and chains. Palm has patches of Skid-X™ Grip for added grip, which is double stitched with Kevlar® thread for durability, and is oil resistant. Exposed cotton surfaces allow for breathability and dexterity. Flexible Hi-Viz TPR on the back of the glove adds impact protection that bends with the fingers, and offers protection from finger tips to wrist while adding increased visibility. Features adjustable short cuff for a snug fit.
For workers who do a lot of machine operating or just need added protection. The Tow Grip 101® is great for non-drilling positions on a rig. The one-piece cotton padded palm allows high dexterity and is double stitched Kevlar® threading for durability. Flexible TPR adds impact resistance for fingers down to the fingertips, thumb, knuckles and metacarpals, hi-vis spandex. Features neoprene long cuff to cover the wrist.
The Tow Grip 201® is for the crucial gripping power with multiple textures and slick surfaces. The oil-resistant, dual-layer Zip Grip palm features non-slip grip on top of a cotton palm for grip control that is reinforced with double stitched Kevlar® thread. Flexible TPR adds impact resistance for fingers down to the fingertips, thumb, knuckles and metacarpals on top of form-fitting spandex. Features neoprene long cuff to cover the wrist.
The H2O Attack SX® glove was created for workers who need extra grip in water with cold and wet environments. The multilayered palm includes the Slashweave™ for cut protection and Skid-X™ to provide added grip. Flexible TPR protects fingers from impacts down to the pinch points, while the hard-shell Polycarbonate defends the knuckles. The high-vis neoprene adds wind resistance, and breathability when dry and adds a thermal buffer when wet.
This resilient and versatile glove features a dual layer, anti-slip grip palm that has added durability for longevity in high-wear areas. Form fitting spandex keeps the hand cool and comfortable, while the Hi-Viz color and reflective strips add visibility.
Great for handling tools and other equipment the HM Impact® features a one piece DNX Grip that provides a better grip and cut resistance. The palm is double stitched for added durability. Flexible TPR protects the back of the hand, finger and thumb from impacts. Also has an adjustable wrist strap to ensure a snug fit.
Use the MicroSable™ liner to extend the life of your gloves in the winter. The MicroSable™ Liner is an oil-and-water resistant, insulated liner that allows you to get year-round use out of your gloves.
Cordova Ogre-CR+ Ice™ cut-resistant gloves with hi-vis HPPE/glass fiber shell and red sandy nitrile coating. Provides extra protection and cushioning with Thermo-Plastic Rubber (TPR) Fingers, back of hand protectors and Hammer-Guard TPR. With a two-ply cut/thermal resistant shell, brushed acrylic lining and an aramid fabric thumb crotch reinforcement that offers added durability. Great for construction, shop work, and industrial applications.
Cordova Ogre-Ice™ Thermal Impact gloves with black sandy nitrile palm coating, acrylic liner and double thermal polyester knit shell for cold weather and winter work. Provides extra protection and cushioning with Thermo-Plastic Rubber (TPR) Fingers and back of hand protectors and Hammer-Guard TPR. The aramid fabric thumb crotch reinforcement offers added durability. Ideal for freezers, extrication, heavy construction, gas and oilfield workers.
Karbonhex™ Dusk mechanic gloves provide a hand-hugging superior fit for optimal comfort and feel, offering versatile pinpoint precision handling. The 0.5mm ultra-thin, yet durable synthetic palm and fingers feature a silicone raised hex grip matrix on the fingertips and palm providing an enhanced grip and high dexterity. Conductive fingertips that allow workers to use with touch screen devices. Also with added anti-abrasion zones on the form-fitting rear of the glove.