3M™ DBI-SALA® Steel D-Ring Anchorage Plate with zinc plated steel D-ring and 304 stainless steel plate. Bolt or weld to structure for fall arrest anchor point. Versatile and simple installation provides a safe fall arrest tie-off point almost anywhere you need one. Pre-drilled 1/2" holes.

Finally, a concrete anchor that will hold-up to its environment, for use in temporary or even permanent applications. Safe "hook-up" indicator notifies the user that the anchor has been installed properly. Anchor is an ideal connection point for shock-absorbing lanyards, self-retracting lifelines, or even horizontal lifeline systems. Unit installs into 11/16", 18 mm or 3/4" holes. Meets applicable OSHA and ANSI standards.

Work confidently with the 3M™ Protecta® Sliding Beam Anchor. This durable solution provides a high-strength anchorage point that follows you while you work. Once you secure it to the beam using the integrated adjustment buttons, simply connect your Self-Retracting Lifeline (SRL) or lanyard to the rotating D-ring and you're ready to work.

Features include:

• Fits beam flanges 3-1/2 in. to 14 in. (9 cm-35.5 cm) wide and up to 1-1/4 in. (3.2 cm) thick
• Rugged, corrosion-resistant construction enhances longevity
• Integrated dual ratcheting adjustment system slides to fit snugly against the beam
• Guarded locking mechanism located on the bottom to reduce chance of accidental disengagement
• Replaceable wear pads eliminate metal-to-metal contact and extend the usability of the product
• Meets ANSI Z359.18 and OSHA 1910.140, 1926.502 Anchorage Connector standards
• 5,000 lb. (22 kN) strength and up to 420 lb. (189 kg) capacity
• Applications include bridge work, buildings, warehouses, arenas, and parking ramps

Use this trolley in combination with one of our self-retracting lifelines. It glides effortlessly along the beam and provides horizontal mobility and fall protection. Trolley guards protect the wheels from damage and keep the beam clear of debris. Dual adjustment dials are fixed to the trolley for precise alignment in 1/8" increments. Unit fits beam flanges from 3" - 8" wide and 11/16" thick.

This horizontal lifeline system is lightweight, easy-to-install and extremely portable. Unit will work alongside you during maintenance, bridge work, construction and manufacturing with absolute safety and reliability. The built-in shock absorber limits arresting forces during a fall and provides the user with a visual impact indicator for added safety. The complete system includes a 60' lifeline with tensioner, built-in shock absorber, two carabiner attachments, two connecting o-rings, two 6' tie-off adaptors and a storage bag. Can be used with any suitable 5,000 lb. rated anchorage point.

3M™ Reusable Hinged Roof Anchor for flat or sloped wood roofs with D-ring and fasteners. Anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all-purpose, steel, concrete, roof, or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA's criteria of a 2-to-1 safety factor.

Features include:

• Installs to sloped or flat wood and metal decking roofs
• Fast and easy nail or screw installation - nails included
• Hinged design with D-ring
• Durable and corrosion resistant construction
• Compact and lightweight design
• Portable and reusable

Install the Truss Boss Anchor to a truss while on the ground.

Mobility. It’s critical to getting the job done, just like your fall protection. With the 3M™ DBI-SALA® Sliding Beam Anchor, you get the best of both worlds. Once you secure it to the beam using the redesigned adjustment buttons, simply connect your Self-Retracting Lifeline (SRL) or lanyard to the swiveling D-ring and you’re ready to work. The anchor point slides effortlessly behind you.

Features include:

• 360-degree swiveling D-ring optimizes your mobility on the beam
• Corrosion-resistant construction meets ANSI standards for weather, environmental, and storage conditions
• Dual ratcheting adjustment buttons are accessible above the beam, while locking mechanism is located on the side to reduce accidental engagement
• Compact size and lightweight materials make transportation a breeze
• Snap-in design of wear pads allows them to be replaced quickly in the field
• Meets ANSI Z359.18 Anchorage Connector standard; OSHA 420 lb./ANSI 310 lb. ratings
• 5,000 lb. (22 kN) strength and up to 420 lb. (189 kg) capacity
• Applications include bridge work, buildings, warehouses, arenas, and parking ramps
• Available sizes: Small and Large