Use this cable lockout to prevent the unexpected activation or energization of equipment or machinery during maintenance repair, or service work. Lockout consists of a durable plastic body and a 3' steel cable. Simply route the cable to lock out the device then feed the cable down the center. When the cable is tight and the source is locked out, squeeze the handle and apply the padlock. The lockout body measures 1"D X 6"L X 2"W and will accommodate up to six padlocks with shackles up to 1/4" in diameter.

Use this lockout to safely and effectively lockout emergency push buttons. The plastic lockout accommodates one padlock with a maximum shackle diameter of 1/4". Lockout measures 2-1/4"H X 4"L X 4"W and comes with a "Do Not Remove" label.

Use this lockout to secure the valve or access point on your propane cylinder or tank. Unit effectively locks out LP gas cylinder handwheels up to 2-3/16" diameter. The plastic lockout measures 2-1/2" Dia. X 3-1/2"W X 3-3/8"H and accommodates three padlocks with shackles up to 9/16" in diameter.

Prevent electrical cords from being inserted into an outlet during maintenance or repair operations. The universal fit closure accepts most cords and plugs. Anti-pry tabs secure lids for maximum protection. The device accommodates three padlocks with shackles up to 9/16" in diameter.

Clamp-on breaker lockouts are used in electrical systems to prevent accidental operation or energization of circuit breakers. These lockouts fit different circuit breakers as needed and accommodate one padlock with shackles up to 9/32" in diameter.

This Zing™ Lockout Cabinet (stocked) stores and organizes lockout devices. The inner shelf features 14 slots for extra storage of padlocks and hasps, and the inside door houses lockout tags and ties. A lockable hasp is included for extra security. The cabinet is made in the USA from recycled stainless steel and is pre-drilled for easy mounting. The station is UL validated for high recycled content, and supports sustainability initiatives and LEED credits. The cabinet measures 17"H x 15-1/4"W x 5-1/2"D and includes 37 components.

Cabinet contents include:

• 2 Aluminum Padlocks, 1.5" shackle, keyed different with 1 key per padlock, color red
• 2 Aluminum Padlocks, 3" shackle, keyed different with 1 key per padlock, color red
• 2 Small Steel Hasps, 1" closed hole, accommodates up to 6 padlocks with shackle diameter up to 3/8"
• 2 Large Steel Hasps, 1.5" closed hole, accommodates up to 6 padlocks with shackle diameter up to 3/8"
• 1 Small Plug Lockout, universal fit closure accepting up to 1/2" dia. cord and 2"W x 3"L plugs, accommodates up to 3 padlocks with shackle diameter up to 9/16"
• 1 Large Plug Lockout, universal fit closure accepting up to 1-1/4" dia. cord and 3"W x 5-1/2"L plugs, accommodates up to 3 padlocks with shackle diameter up to 9/16"
• 1 Small Valve Lockout, fits 1" - 2.5" valves, accommodates up to 3 padlocks with shackle diameter up to 3/8" dia.
• 1 Large Valve Lockout, fits 2.5" - 5" valves, accommodates up to 3 padlocks with shackle diameter up to 3/8"
• 1 Cylinder Lockout, fits over neck rings up to 3-1/2" dia. and valve stems to 1-1/4". Accommodates 1 padlock with shackles to shackle diameter up to 9/16"
• 2 Single Breaker Lockouts, fit single, double and triple pole switches .3" - .6" high, .35" - .44" depth with or without hole, accommodates 1 padlock with shackle diameter up to 9/32"
• 1 Multipole Breaker Lockout, fits double and triple pole switches .3" - .6" high, .35" - .44" depth with or without hole, accommodates 1 padlock with shackle diameter up to 9/32"
• 1 Wall Switch Lockout, accommodates 1 padlock with shackle diameter up to 3/8"
• 10 Lockout Tags with legend, "DO NOT OPERATE". 50 lb. pull strength exceeds OSHA?s requirement
• 10 Cable Ties

Same great locks by Master Lock® and American Lock®, now available in keyed-alike sets. Locks with Xenoy body and nylon shackle are non-sparking and don't conduct electricity. Each lock set has the same key number for added convenience. Additional locks can be ordered later to fit that same key number. Includes 2 keys per lock.

Make it easy to identify individuals working on equipment. Lockout tags are made of .015 mil industrial-strength vinyl. Measure 6" X 3-1/2".