Your North American Safety Solutions Partner
These cost-effective kits provide you with a variety of lockout products, labels and tags. The portable plastic case can be easily transported to various jobs.
Lockout simply snaps onto the breaker switch and accepts locks up to up to a 9/32" in diameter. Unit fits 120V breakers with holes in the switch and tongue.
This lockout works on single pole breakers. Use the thumbscrew to clamp the lockout securely onto the switch, then pull the cover over the thumbscrew and lock it in place to prevent the clamp from being loosened. Lockouts accept lock shackles up to 9/32" in diameter. Unit includes detachable cleats for use on longer switch throws.
Lock out any electrical plug up to 3" wide and 5-1/2" long with a maximum cord diameter of 1-1/4". Two hinged cover plates allow flexibility in accommodating various cord diameters.
Universal lockout works with most major pole breakers that employ a tie-bar including: GE, ITE, Sylvania, Westinghouse, Bryant, Challenger and General Switch Co.
Easy to install lockout device can be used with most wall-mounted switches to lock them in the ON or OFF position. Prevents workers from tampering with switches or accidental startup of equipment. Install using existing faceplate screws.
Lockout accommodates a large variety of electrical plugs up to 3-1/2" in diameter and 5" long, as well as male air hose connectors. Holes accommodate electrical cord or "necked down" pneumatic male fittings commonly attached to a compressed air hose.
Prevent electrical plugs from being inserted into a wall outlet. Small 110V Plug Lockout measures 3-1/2"W X 2"H X 2"D with a 1/2" diameter hole for cable.
This lockable all-metal cabinet is large enough to hold a variety of lockout devices and comes with one adjustable shelf. Lockout safety tips are conveniently located inside of the door as a reminder of proper lockout procedures. Lockout Station measures 16"H X 14"W X 6"D and can be wall mounted or easily transported.
New oversized 480/600 volt frame lockout fits most breakers up to 2-1/2" wide by 7/8" thick.
This portable toolbox kit contains two each of the most popular circuit breaker lockouts.
Have a mechanical hoist or overhead crane that’s not in use? Keep it that way by controlling access to the buttons with the Brady® Pendant Control Safety Cover.
Make sure your workers are safe by supplying labeled lockout hasps for all of their group lockout procedures. Constructed from anodized aluminum alloy with tamper-proof tabs, they are impossible to remove while locks are still in place. Front and back of hasp feature a write-on surface that accepts pencil, pen or permanent marker. Pen and pencil markings can be easily erased allowing for repeated use. Each hasp has 6 lock holes which are 5/16" diameter.
This versatile lockout adjusts to fit 1" - 6-1/2" valve handles, replacing three conventional gate valve lockouts. Lockout is constructed of durable polypropylene, so it's resistant to extreme temperature changes from -50 - 360:F.