This CPI Series pallet truck is made of steel, has a pump handle and polyurethane wheels, and is suitable for lifting and transporting pallets. Steel resists wear and corrosion. The loop-shaped pump handle can be used to jack up the forks and maneuver the pallet truck. The handle is rubber-coated for grip. A trigger on the handle releases and lowers the forks. Nose wheels and the forks' tapered ends facilitate loading. The polyurethane wheels won't puncture or go flat and are resistant to impact and wear. Push rods allow the height of each fork to be adjusted in case of an imbalance. The pallet truck has an overload bypass valve for safety. This pallet truck has a load capacity of 5,500 lbs., weighs 210 lbs., and measures 48-1/4"H x 27"W x 48"L. It has a service range of 2.9" to 7.25" high.
This hard rubber high visibility pallet truck chock is yellow and can be placed under the steering wheels of a pallet truck to hold it still in a moving truck or trailer. The chock is made of rubber, which resists slipping, wear, and weather. It has an incline for rolling the wheels onto the chock to secure the truck, and has a handle for carrying. The pallet truck chock weighs 3.4 lbs. and measures 11.75"W x 2"H x 14"D.
Rubber for resistance to slipping, wear, and weather
This Spartan Sr. aluminum 2-in-1 hand truck can be used for transporting heavy loads up to 500 lbs. in two-wheel mode and up to 1,000 lbs. in four-wheel mode. The handle can be adjusted with a pedal release to enable a four-wheel configuration for horizontal arrangement of cargo, or a two-wheel configuration for vertical stacking of the load. The frame measures 22"W x 19"D x 61.5"H overall in two-wheel mode, the cast-aluminum noseplate is 18"W, and the horizontal load bed measures 12"W x 51"D in four-wheel mode. The truck has two 10" solid rubber load wheels and two 5" non-marking swivel casters for support and maneuverability. This aluminum 2-in-1 hand truck is suitable for use in industrial and commercial settings.
Two sizes: Jr. and Sr.
Sturdy, lightweight aluminum frame
18"W noseplate for large loads
Wheels: PE 10" pneumatic or SR 10" solid rubber
Non-marking 5" x 1.25" swivel casters
Pedal release allows easy conversion from two-wheel to four-wheel position
Extra strength noseplate cast from special aluminum alloy
This hand and drum truck can be used for transporting 30-gal. and 55-gal. industrial drums, 5-gal. pails and kegs, and other loads up to 800 lbs. The truck has a noseplate that measures 14"W x 7.812"D, and it measures 20.5"W x 17.5"D x 48"H overall. It has a chime hook for securing 30-gal. and 55-gal. drums, a curved body for accommodating smaller containers with round edges, and two 8" moldon rubber wheels for maneuverability. This hand and drum truck is suitable for use in industrial and commercial material handling applications.
Utility of a hand truck and drum truck
Chime hook works with 55 and 30-gal. drums
Curved frame holds 5-gal. pails and kegs
With noseplate resting flat on floor, 18" to center of lowered chime hook
This lifter is suitable for use with standard steel or poly drums with at least a 3/16" chime. The lifting arms are adjustable to work with most 30 or 55 gallon drums. A three-point contact of the lifting arms minimizes deformation of the drum, while providing proper alignment of the drum rim to the lifting arm for more secure lifting. Lifter also works on closed head drums.
This pallet leveler/positioner has a rotating carousel atop a steel frame and is suitable for supporting a pallet for loading or unloading. Steel resists wear and corrosion. Three calibrated springs lower the carousel as the pallet is loaded and raise the carousel as the pallet is unloaded. The leveler has fork pockets for moving it using a pallet truck. This pallet leveler/positioner weighs 354 lbs., has a load capacity of 400 to 4,500 lbs., and accepts loads measuring up to 72"H x 50"W x 50"L. It has a service range of 9.25" to 29" high. The carousel measures 40.75" in diameter. The frame measures 45-1/2"L x 36"W. Each fork pocket measures 39"L x 5.75"W.
Pallet leveler progressively lowers as pallet is loaded and raises as pallet is unloaded
Three heavy duty calibrated springs used in combination according to desired load range
Bearing supported carousel for easy turning
Built in fork pockets for ease of transport
Helps reduce fatigue and injury from bending and lifting
This electric office lift with platform can be used for lifting and transporting office supplies with a maximum weight of 220 lbs. A 12V sealed battery raises the platform from its 5" minimum height to its 66" maximum height. The lift has a built-in battery charger and comes with a remote pendant for remote control of the lift in the up and down directions. The frame measures 23.5"W x 34"D x 78"H overall, and the plastic platform measures 18"W x 23"D and is 9/16" thick. It has 2.75" hard rubber load wheels and 5" hard rubber steering wheels for maneuverability. This electric office lift with platform is suitable for lifting and transporting office supplies and other materials in offices or in other settings where space is narrow and loads do not exceed 220 lbs.
This deluxe large wire office cart carries up to 250 lbs. of office supplies, such as letter and legal hanging files, mail, packages, and tools. Both the upper and lower basket can be removed to facilitate loading and unloading. The front swivel casters and rear rigid semi-pneumatic wheels provide smooth movement and maneuverability. The front casters have a 5" diameter and are made of hard rubber; the rear wheels are semi-pneumatic and have a 10" diameter. The cart and handle are constructed from 1" diameter 18-gauge tubes that have been plated for extended life.
Ideal for carrying hanging files (letter and legal) mail, packages, and tools
This standard compact wire office cart carries up to 200 lbs. of office supplies, such as letter and legal hanging files, mail, packages, and tools. Both the upper and lower basket can be removed to facilitate loading and unloading. The front swivel casters and rear rigid casters provide smooth movement and maneuverability. The casters have a 4" diameter and are made of hard rubber. The cart and handle are constructed from 1" diameter 18-gauge tubes that have been plated for extended life.
Ideal for carrying hanging files (letter and legal) mail, packages, and tools
The Professional Series aluminum platform truck has a platform that adjusts in length, a telescopic, folding handle that adjusts in height, and four caster wheels. It can be used to transport heavy or bulky loads. The platform truck is made of aluminum, which weighs less than steel and is resistant to rust and corrosion. The platform adjusts from 29.5" long to 21" long to fit the load. The telescopic handle adjusts in height up to 36.5", can be folded flat for storage, and can be used to control and maneuver the platform truck. A rubber coating on the handle provides a secure grip. The moldon rubber caster wheels measure 4" in diameter, absorb shocks and vibrations, won't deflate or scratch floors, and are resistant to wear. Two of the caster wheels swivel for maneuverability. This platform truck has a load capacity of 330 lbs., weighs 16 lbs., and measures 17.5"W and 36.5"H when the handle is extended. The platform measures 29.5" long when extended and 21" long when retracted.
Deck extends from 21" to 29.5"
Push button, quick conversion
Anti-impact, non-skid polypropylene and aluminum deck
This platform truck with folding handle can be used for transporting heavy loads up to 440 lbs. The handle folds against the platform to minimize storage space required for the truck. The platform has a vinyl deck surface with an enameled finish to prevent load slippage, and vinyl perimeter bumpers for safety. It measures 19"W x 29"D, and the unit measures 19"W x 29"D x 32.5"H overall. The truck has two 4" fixed thermoplastic rubber (TPR) wheels and two 4" TPR swivel casters for non-marking maneuverability. This platform truck with folding handle is suitable for transporting heavy loads in industrial and commercial settings.
Fold down handle for easy storage
Enameled finish with non-skid heavy vinyl deck surface
This manual drum deheader is 20.68" long overall and is suitable for removing drum heads from steel industrial drums. It has a replaceable blade made of hardened steel for strength and durability, and a plastic hand grip for comfort. This manual drum deheader is suitable for use in industrial and commercial drum deheading applications.
Opens any size and gauge steel drum quickly and easily, allowing drum recycling without the risk of fire from cutting with a torch